MINI-HVLP 1/4″ Gravity Feed Spray Gun – 150CC

• H.V.L.P Gravity Feed Spray Gun
• Working Pressure: 2:1 KG/CM
• Air Inlet: G1/4″
• Cup Volume: 150CC
• Nozzle Size: 0.5mm/1.0mm

• Low Air Pressure with High Atomization, Precise-Machined. well-Balanced. Handy and Light Weight in Construction.
• Non-bleeder type. Gravity Feed and External mix.
• Die-cast Aluminum Alloy Gin Bode with 2-step Trigger Control.
• Self- Centering Chrome-Molybdenum Steel Nozzle.
• Spray Width and Fluid Adjustable.
• Plastic Cup or Stainless Steel Cup with Throttle Strainer
• Suitable for Light Material to Handle a Wide Range Viscosity of Water of Oil based Material for General Purpose.

Power Source:

• This tool requires clean, dry and compressed air rated regulated pressure of 2.5 – 3.5bar to operate. The compressed air contains moisture and other contaminates. Using a filter will remove most of these foreign matters. Use a filter and a pressure regulator as close to the tool as possible.

CAUTION:

• Air pressure should be regulated to 2.5 – 3.5 bar. Air pressure which is too low or too high will damage the tool and influence the painting effect.