9.0 L Manual pumping unit

Specification:
Capacity: 9L
• Suction Port: 32mm
• Main Material: ABS with Aluminium inflatory
• Package contains:
– 1 x manual oil pump
– 4xdifferent suction probe sizes for easy adaptation to
different applications:04, 06, 010, and 1 x 4 brass probe

Caution:
1.Do not use gasoline in this operation.
2.For the sake of safety, Do not use this tool to extract or preserve dangerous chemicals.poison, Corrosive liquid, Alkaline liquids
and solvents.
3.Do not use this tool to extract or preserve oil or other flammable objects.
4.Don’t put the product and the tubing in the high-temperature zone, Rain and snow, Direct sunlight Places such as. 5.This product is the highest temperature is 85 °C
6. The pumping unit must discharge liquid after use, Wash clean, Clean and use: Used to extract lubricating oil and automobiles from machines, Motor oil or brake oil on motorcycle,Water in a fish tank.
Product description
1. Remove the oil ruler from the engine.
2. Insert the tubing into the oil hole, Until it hits the bottom of the oil pan,Connect tubing and liquid inlet cover, Connect the two pumping tubing to the pumping unit with the suction pipe adapter.
3. Pull up the handle to the top position, I’m going to put it down, The pumping unit will begin to ship..
4. When the liquid in the pumping unit reaches full state, The pumping unit will automatically stop pumping, Loosen the relief valve button on the lid, Get the pump handle back in place.
5.Pull out the tubing and open the liquid, Treat oil and wastewater according to your local laws and guidelines.